Skiing on lightbulbs
Let's bring focus again on one of the fundamentals of expert carving: Early pressure... or in fact lack thereof and give you some ideas to work on that.
This is one of the movement patterns that is very hard to change, so you will keep seeing sessions and talks about it, throughout the advanced levels.
This session only makes sense when you can Flex to release and working on flex to release is in fact part of this workout.
What is pressure
Pressure is a result of there being weight and weight being applied to the skis, via either muscles or a stacked skeleton or, realistically, both!
As we come out of a flexed transition, we have to extend the legs laterally, to allow the skis to maintain contact with the snow and carve their C arc around the COM err... hips.
.todo photo / diagram?
As discussed under Early pressure, this is where many are tempted to create artificial pressure, which disrupts the entire turn. To work on that, we will try to focus on the exact opposite of artificially creating pressure and that is to avoid pressure.
We will avoid pressure throughout the entire turn:
- at the top of the turn we will avoid extending more forcefully than we need to maintain contact with the snow and
- at the apex and bottom of the turn, we will pre-empt excessive pressure and release early.
So the overriding principle this session is skiing on lightbulbs - where we will avoid creating any pressure and breaking the lightbulbs.
Let's get going
The perfect drill to get us going is The power release, so let's do two runs of power release (read that topic to get familiar again with the details of that drill):
(from The power release)
Top of the turn
Let's focus first on the top of the turn and soften that up completely.
Pressure in the top of the turn is often a mere