TechniqueCarved turn shape

<smallRead Turn shape and speed control for a refresher on <bspeed control</b.</small<p

Carved turn shape

Read for a refresher on speed control.

We saw earlier that a ski put on edge, with weight on it, will carve a given arc… but how much do you put it on edge? You can put it on edge more or less and it will bend more or less and this in turn will result in a tighter turn.

Another thing to remember is that as you put the ski on edge more - you have to (counter) balance with the shoulders and the upper body by bending them more to the outside of the turn, here's how much you can tip the skis on edge even as you stand still:

On snow · Green carve tipping

As you go down a green run, start turning and carving. Do three easy carved turns and then tip the skis on edge more and crunch the shoulders to the outside and do three tighter turns. Then relax and do three easy turns.

Note the difference you feel. As you edge the skis more and put more weight on them, you turn tighter and feel more "forces". Also, the speed may decrease as the skis are "grinding" more against the snow.

More "weight"

Another way to bend a ski more is by applying more "weight" to it. So what we'll try to do next is to place more weight on the outside ski as it's turning.

On snow · Green carve weight

As you go down a green run, start turning and carving. We will attempt to increase the weight on the outside ski and edge it more, for a tighter turn.

So, as you're turning left, move all weight from the left leg to the right leg. At the same time, focus on edging the skis more and more and crunch your shoulders to the right more and more.

Do three easy carved turns and then three tighter turns. Then relax and do three easy turns. Then three tight turns, trying every time to make them tighter and tighter: transfer more weight to the outside ski and edge them more.

Note the difference you feel. As you edge the skis more and put more weight on them, you turn tighter and feel more "forces". Also, the speed may decrease as the skis are "grinding" more against the snow.

.todo need video on snow for this

Note that since we're going slowly on a green run, the "more weight" will be applied by effectively moving the body over the ski. As we pickup more speed, on a blue slope, although the movement is the same, the weight will no longer be "vertical" on the ski, but aligned with the forces we're expecting (so at an angle to the vertical).

.todo photo green "CB" vs "blue CB".

Continue to speed control and turn shape.

1 views

Updated by razie · version 3